SINUS Messtechnik Made in Germnay
Tango_plus
TangoPlus

Integrating basic sound level meter
with 1/1 and 1/3 octave analyzer
according to IEC 61672 and IEC 61260
PTB model registration DE-20-M-PTB-0033

Overview

Tango Plus features

Tango Plus features

Tango Plus - sound level meter for all measurements necessary in workplace and environmental protection

The Tango Plus sound level meter according to IEC 61672 with 1/1 and 1/3 octave analyser for workplace and environmental protection applications. Due to its intelligent software concept and its measuring range of 110 dB without switching to another range, TangoPlus is still very easy to operate despite its high functionality.

It is possible to use the detachable microphone & preamplifier via extension cable. An outdoor protection kit is available on request. The measured values are shown on a TFT colour display and are readable even over larger distances in sunlight or in darkness. The clearly arranged keyboard has a perceptible keystroke.
Tango Plus has, based on state-of-the-art circuit technology, a very low power consumption. Two batteries (1.2 ... 1.5 V, size AA) guarantee an operation time of 40 h and a storage time of 10 years (for lithium batteries). Therefore TangoPlus is practically always ready for use. The instrument has a real-time frequency analyser function for 1/1 or 1/3 octave values.

The Tango Plus sound level meter allows for simultaneous A and C-frequency weightings as well as Fast, Slow and Impulse time weightings. In addition to the momentary sound level values, the instument allows the maximum and minimum sound level values over a given period to be measured. Tango can also measure the LAeq, LCeq, LAtm5 and LAtm5-LAeq values.
The instrument has a real-time frequency analyser function for 1/1 or 1/3 octave values.

All measurement values chosen in the Setup are computed simultaneously and one of these values is selected for display. After starting the integrating measurement, all values are saved automatically. With the help of the USB interface and the Tango Utilities software, the measured values can be read from the memory, saved and converted to a standard office format. Additionally, the software allows a user-defined setup to be defined and transferred to the device (measured values, storage cycles, percentiles).

Typical application of Tango Plus:

  • Traffic and industrial noise measurements
  • Neighborhood and recreation noise monitoring
  • Workplace noise measurements
  • Monitoring / logging of traffic noise
  • Occupational noise measurements
  • Frequency analysis in 1/1 or 1/3octaves in real-time.

Modern technology combines utmost accuracy with simplest operation

The accuracy of the measurement may be considerably improved by calibrating the sound level meter before each measurement. This calibration also remains intact after switching off the device. Because of its reasonable price, easy operation and small dimensions, TangoPlus is the ideal instrument for all users whose measurement tasks require a Class 1 measuring device according to the IEC 61672 standard.

A comprehensive memory management scheme allows different storage cycles to be selected for the various measurement values. In order to prevent incorrect settings from being selected by inexperienced users, the Setup function can be disabled via the interface (Easy Operator Mode).

Type approval by the PTB (legal calibratability in Germany) has been applied for.

Frequency analyser in 1/1 and 1/3 octaves

The Tango Plus sound level meter includes a real-time frequency analyser function with 1/1 and 1/3 octaves according to IEC 61260 class 1 as standard.

Workplace protection applications

For labor protection applications, in addition to the Cweighted values, the exceedance times for three freely-selectable LCPeak thresholds can be measured. This non-standard measurement values allows the degree of noise exposure at a workplace to be captured much better than a measurement of the peak value alone.

Environmental protection applications

Tango Plus allows three freely-selectable statistical values to be measured and saved. These LAFN% percentiles express what A-weighted level was exceeded in N% of the measurement time.

Highest ease of use via integrated software package TANGO-Utilities for Window

The TangoPlus sound level meter may also be operated via USB interface. In this case the PC powers the device through the interface (the scope of delivery also includes a USB adapter for mains power supply). The included Tango-Utilities software allows the operation and configuration of the instrument via PC as well as the data transfer between the two devices.

A separate window is displayed on the PC which allows easy setting of the parameters and rapid transfer of the stored measurement values. A unique feature of Tango is that several measurement values can be stored with individual sample times. The file names and sizes of the saved measurement values are displayed for transfer or deletion. The USB interface also enables the user to integrate TangoPlus easily into a PC-based measuring system.


TANGO Plus system integration with AUDITOR light post-processing software

TANGO Plus system integration with AUDITOR light post-processing software

With the combination of the Tango Plus sound level meter and the AUDITOR light post-processing software we offer a powerful solution for measurement, evaluation and report generation of environmental noise. The post processing allows an effective calculation of Rating Noise Levels according to the German TA-Lärm as well as international standards and laws.

The main features of AUDITOR light are:

  • Import of Tango measurement values and markers
  • Graphical display of long-term measurements
  • Extracting, marking and masking of data
  • Calculation of Rating Noise Levels
  • Report generation

Our full version of the AUDITOR™ software allows the post-processing of all sound level meters & analyzers from SINUS Messtechnik, including Tango Plus.




Options

Tango Plus version / option overview
Version Order no. Scope of delivery
TANGO Plus sound level meter class 1 907004.2 Class 1 sound level meter with 1/1 and 1/3 octave analyser, carrying case, wind screen,
32 MB memory, TANGO-Utilities software for Windows
TANGO Plus sound level meter class 2 907005.0 Class 2 sound level meter with 1/1 and 1/3 octave analyser, carrying case, wind screen,
32 MB memory, TANGO-Utilities software for Windows
Cal 200 Calibrator class 1 800934.4 Calibrator class 1, PTB approved
CR514 Calibrator class 2 801087.7 Calibrator class 2
Microphone extension cable, 3m 961011.7 3m extension cable for remote microphone use
Tripod for SLM 800630.0 Tripod with carrying bag
Tango_Outdoor Kit 907300.4 weather-proof carrying case, 3m microphone extension cable, WS1 microphone weather screen, tripod,
Tango_DC-DC converter, Li battery 14.8V/6.1A, Li-Ion battery charger
Tango_Outdoor Kit without battery 907302.0 weather-proof carrying case, 3m microphone extension cable, WS1 microphone weather screen, tripod
Tango_RS232-ADAPTER 907185.5 USB -> RS232 FTDI Adapter
AUDITOR_light Noise Report Software 801282.1 Post-processing according to international standards and TA-Lärm

Standards and approvals

Standards

IEC 61672: Class 1 sound level meter

IEC 60651: Class 1 sound level meter

IEC 60804: Class 1 sound level meter

IEC 61260: Class 1 octave-band and fractional-octave-band filters

Approvals

DE Germany
PTB type approval DE-20-M-PTB-0033

Software

Tango-Utilities Tango-Utilities (included in the delivery)
Combined with a USB interface the Tango-Utilities software provides the ability to retrieve and store the measurement data stored on the instrument and convert them to an Office standard format. Furthermore you are able to create an individual set-up for Tango and transfer it to the instrument (measurement values, storage cycles, percentiles).

Auditor AUDITOR_light
The combination of the Tango sound level meter and the AUDITOR_light post-processing software forms a powerful Solution for the measurement, evaluation and documentation of time-varying environmental noise. The post-processing allows effective calculation of the rating level according to TA-Lärm and international standards and directives. With the full version of AUDITOR you are able to process the measured values of any SINUS Messtechnik GmbH sound level meter or analyzer, including Tango.

Technical specifications

General technical specifications of Tango Plus
  TangoPlus Tango
Accuracy Integrating sound level meter class 1 or class 2
according to IEC 60651 / 60804 / 61672
1/3 octave analyser class 1 according to IEC 61260
Integrating sound level meter class 1 or class 2
according to IEC 60651 / 60804 / 61672
Calibratability PTB type approval has been applied for. PTB type approval 21.21 / 12.04
Measurement values
  • Sound pressure level LAF, LAS, LCF
  • Maximum sound level LAFmax, LASmax, LCFmax
  • Minimum sound level LAFmin, LASmin, LCFmin
  • Continuous sound level LAeq, LCeq
  • Peak level LCpeak
  • Sound dose LAE,1s, LAE,8h
  • Taktmaximal level LAFT (LAtm5), LAFTeq (LAtm5eq)
  • 3x peak level LCpeak_exceedance
    exceedance duration
    (freely selectable)
  • 3x percentiles (freely selectable) LAFn
  • Continuous sound level LCeq-LAeq, LAFTeq-LAeq
  • Level with impulse time weighting: LAImax
  • Time / measurement time /
    exceedance duration
  • Sound pressure level LAF, LAS
  • Maximum sound level LAFmax, LASmax
  • Minimum sound level LAFmin, LASmin,
  • Continuous sound level LAeq
  • Peak level LCpeak
  • Sound dose LAE,1s, LAE,8h
  • Taktmaximal level LAFT (LAtm5)
  • 3x peak level LCpeak_exceedance
    exceedance duration
    (freely selectable)
  • 3x percentiles (freely selectable) LAFn
  • Continuous sound level LAFTeq-LAeq
  • Level with impulse time weighting: -
  • Time / measurement time /
    exceedance duration
Octave analyser 1/1 and 1/3 octave spectra (10 Hz - 20 kHz; A, C, Z) -
Frequency weightings A, C A, Cpeak
Time weightings Fast, Slow, Impuls, Peak Fast, Slow, Peak
Measuring range 25 to 140dB (LAeq)
60 to 143dB (LCpeak)
30 to 140dB (LAeq)
60 to 143dB (LCpeak)
Resolution 0.1dB 0.1dB
Display Color TFT
  • Resolution 320 x 240 dots
  • Measured value with 3.5 digits
  • Bar graph, spectra, time history
  • Undercut-, overload indicator
  • Measurement time (hh:mm:ss)
  • Battery status of charge
  • Memory status
Backlit LCD:
  • Measured value with 3.5 digits
  • Bar graph in 5-dB steps
  • Undercut, overload
  • Measurement time (hh:mm:ss)
  • Battery state of charge
  • Storage state
Microphone 1/2" measuring microphone,
permanently polarized, removable
Class 1 version 1/2" microphone MK255, 50 mV/Pa
1/2" measuring microphone,
permanently polarized, removable
Class 1 version 1/2" microphone MK255, 50 mV/Pa
Microphone connector LEMO7 1B (for Micro Extension Cable) LEMO7 1B (for Micro Extension Cable)
Audio output connector 3.5 mm jack 3.5 mm jack
Calibration Automatically to 94dB
with external calibrator
Automatically to 94dB
with external calibrator
Storage cycles Individually and freely selectable
for all measurement values
62,5 ms ... 60 min
Individually and freely selectable
for all measurement values
62,5 ms ... 60 min
Storage capacity 32 MB 8 MB
Interface USB 2.0, printer port,
RS232 with the Adapter Tango_RS232-ADAPTER
USB 2.0,
RS232 with the Adapter Tango_RS232-ADAPTER
Batteries 2 x AA type (1.2 ... 1.5V),
all battery models may be used
2 x AA type (1.2 ... 1.5V),
all battery models may be used
Operating time per battery set > 40 h (per set of 2x batteries 2.7 Ah ) > 120h
Temperature range -10°C ... + 50°C -10°C ... + 50°C
Dimensions 190mm x 70mm x 32mm 190mm x 70mm x 32mm
Weight 290g (incl. batteries) 250g (incl. batteries)
Scope of delivery Sound level meter, windscreen,
carrying case, user manual,
1.5m USB interface cable, USB power adapter,
Tango-Utilities software
Sound level meter, windscreen,
carrying case, user manual,
1.5m USB interface cable, USB power adapter,
Tango-Utilities software

Specifications

offer

Wishlist

There are no products selected for the quotation yet.
   Quotation requirement

Noise Dosimeter